INER-G Lubric DM100

Semi-synthetic heavy-duty diesel engine oil — SAE 10W-40, API CI-4, ACEA E7. For high-output turbocharged diesel engines, including EGR engines, where this viscosity grade and performance level are specified. Download Technical Data Sheet  |  LUBRIC range brochure (PDF)

Description

SAE 10W-40 Semi-Synthetic Heavy-Duty Diesel Engine Oil

INER-G Lubric DM100 is a semi-synthetic SAE 10W-40 “Extra High-Performance Diesel” (XHPD) engine oil for high-output, high-speed turbocharged diesel engines operating under severe conditions.

Key facts (INER-G product data)

  • API CI-4, ACEA E7, MTU Oil Category 2, Cummins CES 20077/20078; meets the performance level of MB 228.3, Volvo VDS-3, Mack EO-N, MAN M 3275-1, Renault Trucks RLD-2 and Scania LDF-2
  • Specially formulated for engine durability where exhaust gas recirculation (EGR) is used; recommended for low-emission Euro IV diesel engines
  • Reduces piston deposits, protects against bore polishing and helps reduce oil consumption
  • Supports the extended drain intervals set by major European heavy-duty engine manufacturers
  • Typical values: KV 100 °C 14.1 mm²/s, viscosity index above 135, TBN 10.1 mg KOH/g, pour point below −30 °C; packs 5 L, 20 L, 200 L

Typical Applications

  • Heavy-duty trucks and buses (on- and off-highway)
  • Diesel generator engines
  • Construction and agricultural equipment
  • Other diesel engines requiring SAE 10W-40 API CI-4 / ACEA E7 performance

Always follow the engine manufacturer’s lubricant specification and recommended service interval.

For practical selection factors such as SAE viscosity, API/ACEA performance, operating profile and service interval, see our guide to choosing engine oil for a diesel generator.

Explore the INER-G lubricant range and visit our Technical Data Sheets & Product Brochures page for supporting documents.

Download the INER-G Lubric DM100 Technical Data Sheet

Need help selecting a lubricant for a diesel generator or heavy-duty engine? Contact INER-G.