How to Read an Engine Oil Label: SAE, API, ACEA and OEM Approvals

TotalEnergies Quartz 7000 10W-40 engine oil

Quick answer: an engine oil label tells you three things: the viscosity grade (SAE, for example 10W-40), the performance level (API, ACEA or ILSAC, for example API SP or ACEA C3) and any manufacturer approvals. The right oil is the one that matches what your owner’s manual asks for on all three.

1. SAE viscosity grade (for example 10W-40)

  • Multigrade oils have two numbers. The number before the W (winter) describes cold-start behaviour: the lower it is, the more easily the oil flows at low temperature. The second number describes the viscosity at normal engine operating temperature (100 °C): the higher it is, the thicker the oil when hot.
  • Monograde oils have one number, such as SAE 40. They are still used in some older engines and in certain diesel equipment. Example: TOTAL Motor Oil Classic SAE 40.

Use the grade in the manual. A thicker oil is not automatically “more protective”; modern engines are designed around a specific viscosity.

2. API service category

The American Petroleum Institute uses two letters:

  • S categories are for petrol (spark-ignition) engines. The second letter rises with newer standards: API SN and SP are recent levels, while SF or SJ are old and obsolete.
  • C categories are for diesel (compression-ignition) engines: API CI-4 and CK-4 are recent heavy-duty diesel levels; CF or CD are old.

A label such as “API SN/CF” means the oil meets a petrol category and a diesel category. Newer categories generally cover the needs of older ones, but always check the manual, especially for older engines.

3. ACEA sequences (European standard)

  • A/B (for example A3/B4): petrol and light diesel car engines.
  • C (for example C2, C3): “low-SAPS” oils for cars with particulate filters and catalysts.
  • E (for example E7, E8, E11): heavy-duty diesel engines in trucks and equipment.

4. ILSAC (for example GF-6)

ILSAC grades are used mainly for petrol cars from Japanese and American manufacturers and focus on fuel economy. They usually appear on low-viscosity oils such as 0W-20 or 5W-30.

5. Manufacturer (OEM) approvals

Many car and engine makers publish their own specifications, for example Mercedes-Benz 229.x, Volkswagen 50x 00, BMW Longlife or Cummins and Volvo standards for trucks. If your manual asks for a specific approval, choose an oil that lists it on the label or technical data sheet.

6. Base oil and other words on the bottle

“Mineral”, “synthetic technology” or “fully synthetic” describe the base oils. They affect performance at temperature extremes and drain intervals, but the SAE grade, performance level and approvals remain the main selection criteria.

Putting it together: a quick checklist

  1. Find the required SAE grade and performance level in the owner’s or engine manual.
  2. Check any OEM approval the manual requires.
  3. Match all of them on the oil label or technical data sheet.
  4. Consider the duty: heavy loads, heat and dust may call for shorter oil-change intervals.

Browse TotalEnergies lubricants, automotive engine oils and diesel engine oils, or read How to Choose Engine Oil for a Diesel Generator. Not sure? Contact INER-G with the vehicle or engine model.

Not sure which oil you need? Use our lubricant selector: pick the application, then match the grade and performance level. Open the selector »

Frequently Asked Questions

What does the W mean in 15W-40?

W stands for winter. The number before it describes how easily the oil flows at low temperature; the second number describes its viscosity at operating temperature.

Is API SP better than API SN?

API SP is the newer petrol-engine category and is designed to cover the requirements of SN. Use the level your manual specifies or a newer one that covers it.

Can I use a car oil in a diesel truck or generator?

Only if it carries the diesel category or approval the engine maker requires. Heavy-duty diesel engines normally need an API C (for example CI-4 or CK-4) or ACEA E oil.

What is a low-SAPS oil?

An oil with reduced sulphated ash, phosphorus and sulphur, labelled for example ACEA C3. It protects particulate filters and catalysts in modern cars.