Description
SAE 10W-40 Semi-Synthetic Heavy-Duty Diesel Engine Oil
INER-G Lubric DM100 is a semi-synthetic SAE 10W-40 “Extra High-Performance Diesel” (XHPD) engine oil for high-output, high-speed turbocharged diesel engines operating under severe conditions.
Key facts (INER-G product data)
- API CI-4, ACEA E7, MTU Oil Category 2, Cummins CES 20077/20078; meets the performance level of MB 228.3, Volvo VDS-3, Mack EO-N, MAN M 3275-1, Renault Trucks RLD-2 and Scania LDF-2
- Specially formulated for engine durability where exhaust gas recirculation (EGR) is used; recommended for low-emission Euro IV diesel engines
- Reduces piston deposits, protects against bore polishing and helps reduce oil consumption
- Supports the extended drain intervals set by major European heavy-duty engine manufacturers
- Typical values: KV 100 °C 14.1 mm²/s, viscosity index above 135, TBN 10.1 mg KOH/g, pour point below −30 °C; packs 5 L, 20 L, 200 L
Typical Applications
- Heavy-duty trucks and buses (on- and off-highway)
- Diesel generator engines
- Construction and agricultural equipment
- Other diesel engines requiring SAE 10W-40 API CI-4 / ACEA E7 performance
Always follow the engine manufacturer’s lubricant specification and recommended service interval.
For practical selection factors such as SAE viscosity, API/ACEA performance, operating profile and service interval, see our guide to choosing engine oil for a diesel generator.
Explore the INER-G lubricant range and visit our Technical Data Sheets & Product Brochures page for supporting documents.
Download the INER-G Lubric DM100 Technical Data Sheet
Need help selecting a lubricant for a diesel generator or heavy-duty engine? Contact INER-G.



